NEW POWERFUL FLAT DOME, WITH VERY THIN BORDERS.
Both powerful and very diffuse, the Medium Flat MFDOME+ can deal with many machine vision applications. The Medium Flat MFDOME+ has been designed to detect small pieces in a container, to highlight thermoformed products or also to improve contrasts on workpieces made of several materials. The OVERDRIVE version can offer a lighting power far higher and the TRINITI version (with no current control inside) even more. It works in continuous and strobe mode, with very short rising and falling times: 25 μs and 15 μs.
Equipped with very thin borders, the new Medium Flat MFDOME+ uniformly illuminates from the whole useful surface, included from the edges. No hot spot to notice ! Very thin, the Medium Flat MFDOME+ gets a hole in the middle to insert the camera’s lens. And using the TPL Vision mounting accessories (in option), you can easily integrate it thanks to the mounting plate. The connector can be placed on any side of the Medium Flat MFDOME+, which can then be set up on any kind of conveyor belts. At the basis of the connector, 2 LED indicators show if the product is powered and if the strobe mode is on.
The Medium Flat MFDOME+ is available in various wavelengths, and also in various dimensions. For specific sizes, that don’t belong to the standard range, you can call TPL Vision for customized products.
- POWERFUL FLAT DOME,
- ULTRA-THIN BORDERS,
- RISING TIME: 25 μs.
3 versions available
Besides the STANDARD version, 2 other versions of the MFDOME+ are available:
OVERDRIVE UP TO X3 WITH CURRENT CONTROL INSIDE
The OVERDRIVE version is just as easy to set and to use as the STANDARD version. Equipped with specific electronics, it gives the opportunity for users to overdrive on their own the lighting power. The OVERDRIVE version is dedicated to specialists who want to customize the luminous flux very precisely, so as to get the most reliable results.
CONNECT YOUR ILLUMINATION TO YOUR NETWORK
Thanks to the Triniti compliant range, you can easily connect the light to your network (GigE Vision or Ethernet) through a dedicated current controller. Consequently, the integrators can easily anticipate the maintenance operations and the end users can optimize the performances of their systems. More than 1250 part numbers are available at TPL Vision.
To view all the technical information, please click on the tabs below.