NEW HIGH POWERFUL BACKLIGHT, WITH VERY THIN BORDERS .
The Medium MBACK+ is a backlight both powerful and very diffuse, dedicated to many machine vision applications. Thanks to the high power LED inside, it creates intense luminous flux, that helps cameras to see the workpieces shapes thanks to the shadow puppet effects. You can even decrease the light power when necessary. The OVERDRIVE version can offer a lighting power far higher and the TRINITI version (with no current control inside) even more. It works in continuous and strobe mode, with very short rising and falling times: 25 μs and 15 μs. Equipped with very thin edges, the Medium MBACK+ uniformly illuminates from the whole useful surface, included from the edges. No hot spot to notice ! The connector can be placed on any side of the Medium MBACK+, which can then be set up on any kind of conveyor belts. At the basis of the connector, 2 LED indicators show if the product is powered and if the strobe mode is on. The Medium MBACK+ is perfectly adapted to quality control tasks, such as: presence/absence, edge defects, material lack. It can also be used as a direct diffuse lighting solution, to inspect shiny workpieces. The Medium MBACK+ is available in various wavelengths, and also in various dimensions. For specific sizes, that don’t belong to the standard range, you can call TPL Vision for customized products.
- HOMOGENEOUS POWERFUL BACKLIGHT,
- ULTRA-THIN BORDERS,
- RISING TIME: 25 μs.
3 versions availableBesides the STANDARD version, 2 other versions of the MBACK+ are available:
OVERDRIVE UP TO X3 WITH CURRENT CONTROL INSIDE
The OVERDRIVE version is just as easy to set and to use as the STANDARD version. Equipped with specific electronics, it gives the opportunity for users to overdrive on their own the lighting power. The OVERDRIVE version is dedicated to specialists who want to customize the luminous flux very precisely, so as to get the most reliable results.
CONNECT YOUR ILLUMINATION TO YOUR NETWORK
Thanks to the Triniti compliant range, you can easily connect the light to your network (GigE Vision or Ethernet) through a dedicated current controller. Consequently, the integrators can easily anticipate the maintenance operations and the end users can optimize the performances of their systems. More than 1250 part numbers are available at TPL Vision.
To view all the technical information, please click on the tabs below.